The construction site is similar to a community. Its difference is that a lot of tools and equipment make up the site. Workers use these things all the time. But, among all of these tools in the site, a crane is considered to be the most important one. If the crane gets damaged, it would cause delays to the construction. It is essential that the crane must be inspected to see if there is any problem.
There are a few steps for inspecting cranes. Mobile crane inspections should be done from time to time. The first step one should do is do an observation on how its operator uses it. Check if the operator has enough qualifications to use it and check for the certification of the machine.
The next step is to check how it has been set up. Check if it is in a level where it can be safe to operate it and rotate it if they need to. See to it that its attachments are being used in accordance to its manual. It should also be stable enough to be able to resist being overturned by the load it carries.
See to it that it is not used to carry loads under electric power lines. This is the most dangerous thing to do for the machine. It should be at least ten feet away from the electric power lines. The lines should be appropriately marked so it can easily be seen by the operators.
An operator must have a copy of the manual suitable for that machine. Each of these equipments have a suitable manual for them. Be sure that an operator understands the procedures written in its manual. Besides that, he should know how to apply the procedures written in it.
It should be inspected before use to make sure that they still have a good condition. It will help see if there is a problem on it. If there is a problem, this should immediately be reported so it will be repaired. If it will be inspected before using, they could make sure that it does not get damaged easily.
Check the modules of the cranes for any damages. Checking the wiring should also be done. If there is damage, it must be immediately repaired. Always remember to check the tires if they are inflated properly. Check for leaks of its fluid or air. The breaks and its clutches must be checked as well.
When it is turned on, ask operators to raise it and lower it. This would make one sure that it is able to stop and move properly. There should also be a fire extinguisher available near the area. Everyone in the site should be able to know how to use it.
Cranes should be inspected at all times. It helps prevent any damages in the future. It could also prevent unexpected accidents to happen. It could help the workers on sites to be away from any dangers caused by damaged cranes. When used and inspected properly, this machine can provide great service to construction sites.
There are a few steps for inspecting cranes. Mobile crane inspections should be done from time to time. The first step one should do is do an observation on how its operator uses it. Check if the operator has enough qualifications to use it and check for the certification of the machine.
The next step is to check how it has been set up. Check if it is in a level where it can be safe to operate it and rotate it if they need to. See to it that its attachments are being used in accordance to its manual. It should also be stable enough to be able to resist being overturned by the load it carries.
See to it that it is not used to carry loads under electric power lines. This is the most dangerous thing to do for the machine. It should be at least ten feet away from the electric power lines. The lines should be appropriately marked so it can easily be seen by the operators.
An operator must have a copy of the manual suitable for that machine. Each of these equipments have a suitable manual for them. Be sure that an operator understands the procedures written in its manual. Besides that, he should know how to apply the procedures written in it.
It should be inspected before use to make sure that they still have a good condition. It will help see if there is a problem on it. If there is a problem, this should immediately be reported so it will be repaired. If it will be inspected before using, they could make sure that it does not get damaged easily.
Check the modules of the cranes for any damages. Checking the wiring should also be done. If there is damage, it must be immediately repaired. Always remember to check the tires if they are inflated properly. Check for leaks of its fluid or air. The breaks and its clutches must be checked as well.
When it is turned on, ask operators to raise it and lower it. This would make one sure that it is able to stop and move properly. There should also be a fire extinguisher available near the area. Everyone in the site should be able to know how to use it.
Cranes should be inspected at all times. It helps prevent any damages in the future. It could also prevent unexpected accidents to happen. It could help the workers on sites to be away from any dangers caused by damaged cranes. When used and inspected properly, this machine can provide great service to construction sites.
No comments:
Post a Comment