Stripping is not the only option in restoring the original luster to furniture especially if you live in Austin city, TX. An alternative is available which ensures preservation of the veneer and original finish character. The good news is that furniture restoration Austin have come up with easy tips to aid you in retaining the beauty of your antique wood-piece.
Before beginning any repairs, wipe wood piece with mineral spirits so you can decide on the next step you will be taking. Mineral spirits saturates the finish temporarily and reveals the appearance of the furniture with just a coat. Cleaning thoroughly is important as a first step in furniture restoration. By removing most of the dirt you are restoring the original shine. It is recommended that you use a mixture of ivory liquid soap with water mixed in a same proportion as that used in washing utensils. Dip a wiper in the mixture and wring out. Use it to scrub the surface gently. For carvings and molded piece it is better to use a paint brush. When you are through with cleaning, rinse using a wrung sponge and clean water and then dry it out with a towel.
After cleaning, the surface is rinsed with clean water and dried. Petroleum jelly and special removers are recommended in the removal of white rings. Firstly smear the ring using petroleum jelly and leave it to stay overnight. It works to get rid of the ring or make it less noticeable.
Delicate paint removers are used to scrap the paint taking care not to damage the finish. This can be made from razor and masking tape pieces whereby the tapes are wrapped round the blades and bend to curve. The damage is then filled with epoxy after thoroughly mixing epoxy putty. Its placed inside area that needs repair. If you find out that there are any absent veneer or chipped wood or even damaged molding, fix using the putty too.
After the epoxy has hardened; this could take several hours, you can now sand and tinge the repair. The repair is blended onto the surrounding surface through gel stain painting which matches color and design. Select two stain colors matching bright and obscure wood areas. A dab of both is put on a wood scrap creating various color ranges by unifying the two.
Spread gel stain onto the surface and wipe excess. The gel stain does not remove darkened water marks or remove the unwanted defects. All it does is hiding fine scratches and colors in regions that the finish has worn out.
Small cracks or nail holes are filled with fill sticks of wax that are colored. Repair sticks made of wax or fills of pencil can also be used. Small dents can be done away with through wetting. The moisture from the wetting makes the crumbled wood to swell back to its former shape.
The last step in the furniture restoration process is that of wiping a finishing coat. After having cleaned the furniture and having done all the needed repairs and touch ups, by wiping a finishing coat you are storing the original sheen and protecting the wood surface. Any type of finish can be used to complete the work.
Before beginning any repairs, wipe wood piece with mineral spirits so you can decide on the next step you will be taking. Mineral spirits saturates the finish temporarily and reveals the appearance of the furniture with just a coat. Cleaning thoroughly is important as a first step in furniture restoration. By removing most of the dirt you are restoring the original shine. It is recommended that you use a mixture of ivory liquid soap with water mixed in a same proportion as that used in washing utensils. Dip a wiper in the mixture and wring out. Use it to scrub the surface gently. For carvings and molded piece it is better to use a paint brush. When you are through with cleaning, rinse using a wrung sponge and clean water and then dry it out with a towel.
After cleaning, the surface is rinsed with clean water and dried. Petroleum jelly and special removers are recommended in the removal of white rings. Firstly smear the ring using petroleum jelly and leave it to stay overnight. It works to get rid of the ring or make it less noticeable.
Delicate paint removers are used to scrap the paint taking care not to damage the finish. This can be made from razor and masking tape pieces whereby the tapes are wrapped round the blades and bend to curve. The damage is then filled with epoxy after thoroughly mixing epoxy putty. Its placed inside area that needs repair. If you find out that there are any absent veneer or chipped wood or even damaged molding, fix using the putty too.
After the epoxy has hardened; this could take several hours, you can now sand and tinge the repair. The repair is blended onto the surrounding surface through gel stain painting which matches color and design. Select two stain colors matching bright and obscure wood areas. A dab of both is put on a wood scrap creating various color ranges by unifying the two.
Spread gel stain onto the surface and wipe excess. The gel stain does not remove darkened water marks or remove the unwanted defects. All it does is hiding fine scratches and colors in regions that the finish has worn out.
Small cracks or nail holes are filled with fill sticks of wax that are colored. Repair sticks made of wax or fills of pencil can also be used. Small dents can be done away with through wetting. The moisture from the wetting makes the crumbled wood to swell back to its former shape.
The last step in the furniture restoration process is that of wiping a finishing coat. After having cleaned the furniture and having done all the needed repairs and touch ups, by wiping a finishing coat you are storing the original sheen and protecting the wood surface. Any type of finish can be used to complete the work.
No comments:
Post a Comment